For Labor Day I decided to celebrate by being laborious. Actually, the truth is that the wet Portland winter is just around the corner and I really needed to rain proof my picture window in the front of the house that faces south. Though it's not that obvious in the picture below, the ship lap siding above the window is cracked. Water leaks can sometimes be maddening to find, but I'm fairly certain this has got to be the reason.
By the way, other than mowing the lawn and general house chores, this is the only work I've taken on with regards to the house since finishing up the dining room remodel. Hence, a stale blog.
I was a little worried that once I got the old boards off, I'd be looking at dead air space (no insulation), but fortunately I uncovered some insulation so the project would continue as planned. One thing I did find was that there is no blocking from the first floor wall to the second floor wall. This is beneficial, I am told, from major damage should a fire break out by slowing the flames from spreading to the second floor from the first. Obviously, it would have been wise to take of this now with the siding off, but there's only so much time.
With the new boards on:
And the final product:
Hi Joe--
ReplyDeleteI have a similar situation with our 1887 Portland farmhouse and was wondering where you were able to find the bevel edge shiplap siding? Thanks. Don
The best deal I found on the siding was a lumber/hardware store on SE 52 down by Duke. But many lumber stores carry it including Disdero in Clackamas.
ReplyDelete